Skripsi

PENGARUH PERLAKUAN AWAL LIMBAH PLASTIK POLYPROPYLENE SEBAGAI PENGGANTI SEBAGIAN PASIR TERHADAP KUAT TEKAN DAN KUAT TARIK BELAH BETON

---

Penilaian

---

Indonesia is the second-largest waste-producing country after China, with 18% of the waste consisting of plastic. One of the most commonly found types of plastic is polypropylene (PP), which is lightweight, chemically resistant, and thermoplastic in nature. One way to address the plastic waste problem is by utilizing it in concrete mixtures. This study aims to analyze the effect of pretreatment on polypropylene plastic waste on the compressive strength and splitting tensile strength of concrete, with polypropylene plastic pellets used in mixture variations of 0%, 10%, 20%, and 30%. Sand coating was employed as a pretreatment method to increase the surface roughness of the plastic pellets. The test specimens were cylindrical with dimensions of 10 × 20 cm, and the concrete was tested at 7 and 28 days. The results showed that concrete containing polypropylene plastic pellets achieved optimum performance at a 30% mixture, with a compressive strength of 28.04 MPa and a splitting tensile strength of 3.03 Mpa, representing an increase of 5% and 4.61% respectively compared to normal concrete. This study demonstrated that pretreated polypropylene plastic waste can proportionally improve both the compressive and splitting tensile strength of concrete.

---

Availability

Inventory Code	Barcode	Call Number	Location	Status
2507004277	T179277	T1792772025	Central Library (Reference)	Available but not for loan - Not for Loan

Detail Information

Series Title

-

Call Number

T1792772025

Publisher

Indralaya : Prodi Teknik Sipil dan Perencanaan, Fakultas Teknik Universitas Sriwijaya., 2025

Collation

xiii, 104 hlm.; ilus.; tab.; 29 cm.

Language

Indonesia

ISBN/ISSN

-

Classification

624.07

Content Type

Text

Media Type

-

Carrier Type

-

Edition

-

Subject(s)

Teknik Sipil

Specific Detail Info

-

Statement of Responsibility

MI

Other version/related

File Attachment

Comments

---

You must be logged in to post a comment