Skripsi

ANALISA HEADLOSS TERHADAP VARIASI MATERIAL PIPA DAN SUDUT ELBOW

---

Penilaian

---

Pipes are important components in fluid conduit systems, which are used to move different types fluids from one place to another. The efficiency of a fluid conduit system can be improved by careful and precise design, which includes the selection of pipe diameter, pipe position, type connection, and number of turns. This research is an experimental study to determine the Headloss of 3 pipe materials and different elbow angles. For this reason, the title of this thesis is “Headloss Analysis of Pipe Material Variations and Elbow Angles. the parameters needed are pipe diameter (D), flow rate (Q) and elbow angle (θ) with 3 different pipe materials. These data are used to calculate the loss coefficient (K). The largest Headloss value is found at the elbow angle 90 with a D variation of 22 mm, Galvanized material with a discharge of 20L/min which is 0.09934 m. While the smallest Headloss value is at the elbow angle 45, variation D 26 mm, discharge 10L/min with PPR material which is 0.0361 m. Where Galvanized Headloss is greater than PPR. because the surface roughness of the PPR pipe of 0.0015 is smaller than the roughness of the galvanized pipe which is 0.015, besides that the Headloss value is also influenced by the roughness value of the elbow turn type, at the elbow 45 of 0.35 while the roughness value for the elbow 90 sebesar is 0.75, it can be concluded that the greater the roughness value of the elbow, the higher the Headloss value.

---

Availability

Inventory Code	Barcode	Call Number	Location	Status
2507000372	T164557	T1645572024	Central Library (Reference)	Available but not for loan - Not for Loan

Detail Information

Series Title

-

Call Number

T1645572024

Publisher

Indralaya : Prodi Teknik Mesin, Fakultas Teknik Universitas Sriwijaya., 2024

Collation

xxvii, 81 hlm.; ilus.; tab.; 29 cm.

Language

Indonesia

ISBN/ISSN

-

Classification

621.860 7

Content Type

Text

Media Type

-

Carrier Type

-

Edition

-

Subject(s)

Teknik perpipaan
Prodi Teknik Mesin, Fakultas Teknik

Specific Detail Info

-

Statement of Responsibility

MI

Other version/related

File Attachment

Comments

---

You must be logged in to post a comment