Skripsi

PENGARUH PEREGANGAN MEKANIK TERHADAP KEKUATAN TEGANGAN TEMBUS BAHAN ISOLASI KOMPOSIT SiR DIBERI PENGISI SiC.

---

Penilaian

---

This study report the effect of mechanical stress in the form of pulling on the breakdown voltage characteristics of silicone rubber filled with silicone carbide with a concentration of 0; 5; 10; 15 wt%. The sample was made in a dumbbell shaped with a length of 50 mm, a width of 25 mm and a thickness of 1 mm. The test was carried out using a needle-plate electrode with the application of an alternating voltage which was increased slowly at a rate of 100 V/sec, with a gap between the sample surface and the electrode of 1 mm. Samples were given a tensile treatment with a tensile variation of 0; 0.5; 1; 1.5 cm for 1 hour. Tests on pure silicone rubber obtained a PDIV value of 1.830 kV and a VBD of 3.058 kV. The addition of filler shows that the filler affect an increasing of the PDIV value to 1.941; 1,962; 1.947 kV and VBD to 3.205 kV and 3.288 kV, then get a lower value to 2.958 kV. However, the tensile treatment on the composite sample is thought to have a partial damage effect so that it can reduce the quality of the insulation. A significant decrease occurred when the sample experienced a 1.5 cm withdrawal, the PDIV value became 2.219; 2,248; 2.289 and 2.161 kV and VBD to 2.864; 2,983; 3.090 and 2.743 kV.

---

Availability

Inventory Code	Barcode	Call Number	Location	Status
2307004030	T126966	T1269662023	Central Library (Referens)	Available

Detail Information

Series Title

-

Call Number

T1269662023

Publisher

Indralaya : Prodi Teknik Elektro, Fakultas Teknik Universitas Sriwijaya ;., 2023

Collation

xxi, 53 hlm.; ilus.; 21 cm

Language

Indonesia

ISBN/ISSN

-

Classification

621.319 07

Content Type

Text

Media Type

unmediated

Carrier Type

-

Edition

-

Subject(s)

Distribusi Listrik
Prodi Teknik Elektro

Specific Detail Info

-

Statement of Responsibility

MURZ

Other version/related

File Attachment

Comments

---

You must be logged in to post a comment