Skripsi
PENGOLAHAN LIMBAH PALM OIL MILL EFFLUENT (POME) DENGAN PENGARUH VARIASI KUAT ARUS DAN WAKTU MENGGUNAKAN METODE ELEKTROKOAGULASI DAN FILTRASI ARANG AKTIF
Research has been carried out on the processing of Palm Oil Mill Effluent waste with variations in current and time using electrocoagulation and activated charcoal filtration methods. POME is a liquid waste generated during the production of palm oil. This study uses electrocoagulation and activated charcoal filtration methods which aim to compare the effect of current and time on decreasing pH levels, TDS (Total Dissolved Solid), TSS (Total Suspended Solid), Oils and Fats, COD (Chemical Oxygen Demand), and Aluminum Oxide (Al2O3) in POME. In the electrocoagulation method using aluminum electrodes. From the results of the study, it is known that the current and time of electrocoagulation significantly affect the decrease in pH levels, TDS (Total Dissolved Solid), TSS (Total Suspended Solid), Oils and Fats, COD (Chemical Oxygen Demand), and Aluminum Oxide (Al2O3), while the addition of activated charcoal filtration did not have a significant effect on changes in levels after the electrocoagulation process, but the change in the color of the effluent was more noticeable. The results of the study using the electrocoagulation method and the addition of activated charcoal filtration were obtained when 100 Ampere was electrified for 5 hours with an efficiency of pH, TDS (Total Dissolved Solid), TSS (Total Suspended Solid), Oil and Fat, COD (Chemical Oxygen Demand), Aluminum Oxide (Al2O3) respectively 4.57%, 11.26 %, 95.97 %, 90.78%, 54.69%, 48.53%. Kinetic analysis of oil and fat reduction with a first-order reaction showed that the electrocoagulation device worked well in reducing the concentration of oil and fat in POME
Inventory Code | Barcode | Call Number | Location | Status |
---|---|---|---|---|
2307000839 | T90093 | T900932023 | Central Library (Referens) | Available |
No other version available