Skripsi
UJI KINERJA MODIFIKASI MESIN PENGIRIS DENGAN SUMBER ENERGI LISTRIK DC UNTUK BAHAN BAKU PISANG KEPOK (Musa Paradisiaca Forma).
This study aimed to determine the performance of a modified slicing machine using a direct current (DC) electric energy source. The research method used is a descriptive method with speed test treatment on the slicing machine. The treatments used consisted of speeds of 820 rpm, 800 rpm and 780 rpm. Each treatment was repeated three times on DC and AC electric currents. The study results obtained that the output data on DC and AC electric currents were 474.8 grams and 481.0 grams, respectively. The slicing process influences this and the electric current used. The speed and electric current used also affect the voltage, electric power, slicing time and energy requirements. Based on the study results, it showed that the AC has an average of 0.68% and DC electric current has an average of 0.67%, while the average voltage, power and AC energy requirements are smaller than DC electric current. This causes the slicing time to be slower, and the yield is less than the DC electric current. The highest yield was found in AC electric current at 820 rpm at 97.6%, and the lowest was at AC electric current at 780 rpm at 91.63%. The highest damaged material found in AC electric current at 780 rpm at 26.91%, and the lowest is in AC electric current at 820 rpm at 18.95%. The material left behind in the tool is the highest in the DC electric current at 780 rpm at 3.99% and the lowest in the DC electric current at 820 rpm at 1.59%. Keywords : Slicing Machine, Kepok Banana, Performance Test.
Inventory Code | Barcode | Call Number | Location | Status |
---|---|---|---|---|
2207004367 | T81226 | T812262022 | Central Library (Referens) | Available |
No other version available