Skripsi

SIMULASI PENGECORAN ALUMINIUM SKRAP METODE GRAVITY DIE CASTING MENGGUNAKAN ESI PROCAST

---

Penilaian

---

Scrap aluminum is used as a type of recycled metal that is commonly used in the metal casting industry. Nowadays, conventional metal casting using metal molds by gravity method has a risk of defects that may occur. One method that can be used is to use the ESI ProCAST software casting simulation. The ESI ProCAST software makes it easy to identify phenomena and defects such as shrinkage porosity caused by cast products. Simulations were carried out using variations in mold dimensions of 50 mm x 50 mm, 75 mm x 75 mm, 100 mm x 100 mm with variations in the types of open and closed molds. The liquid temperature values of liquid metal and solidus temperatures produced in the simulation were at 581,7 celcius degrees and 553,5 celcius degrees, respectively. The solidification time produced by the open mold obtained values of 57,34 seconds, 90,79 seconds, 125,3 seconds, the closed mold 50,29 seconds, 75,98 seconds, 114,6 seconds, and the closed mold using a riser of 42,06 seconds, 62,57 seconds and 112,0 seconds. The resulting shrinkage porosity is 0,88%, 1,48%, 4,9% for variations in the dimensions of the open mold type, while the closed mold and closed mold using the riser were at 0%, 0%, 1,46%,and 58,23%, 26,06%, 0%.

---

Availability

Inventory Code	Barcode	Call Number	Location	Status
2207003218	T76814	T768142022	Central Library (Referens)	Available

Detail Information

Series Title

-

Call Number

T768142022

Publisher

Indralaya : Prodi Teknik Mesin, Fakultas Teknik Universitas Sriwijaya., 2022

Collation

xv, 65 hlm.; ilus.; 29 cm

Language

Indonesia

ISBN/ISSN

-

Classification

621.980 7

Content Type

Text

Media Type

-

Carrier Type

-

Edition

-

Subject(s)

Teknik mesin
Alat Pemeras, Alat Pembentuk
Simulasi Pengecoran Alumunium

Specific Detail Info

-

Statement of Responsibility

MURZ

Other version/related

File Attachment

Comments

---

You must be logged in to post a comment