Skripsi

PENGARUH VARIASI ARUS LISTRIK DAN JARAK KAMPUH PENGELASAN TERHADAP DISTORSI SAMBUNGAN PELAT BAJA KARBON RENDAH DENGAN MENGGUNAKAN LAS SMAW

---

Penilaian

---

Welding of low carbon steel plate joints must pay attention to distortion problems that occur during the welding process or after the material has cooled. In this study, an analysis was carried out to determine whether there was an effect of variations in welding current (90, 100, 110 A) and seam distance (1, 2, 3 mm) in SMAW welding on the distortion of low carbon steel ST-37. The results of data analysis show that there is an effect between increasing the welding current and increasing the knitting distance on the resulting distortion, the greater the current and the knitting distance used, the greater the distortion that occurs. The largest distortion is found at 110 A current with a distance of 3 mm which gets a strain of 1.9 mm and a distortion angle of 2.2°. And the smallest distortion occurs at a current of 90 A with a distance of 1 mm which gets a strain of 0.5 mm and a distortion angle of 0.6 °

---

Availability

Inventory Code	Barcode	Call Number	Location	Status
2207000880	T68578	T685782022	Central Library (Referens)	Available

Detail Information

Series Title

-

Call Number

T685782022

Publisher

Indralaya : Prodi Pendidikan Teknik Mesin, Fakultas Keguruan dan Ilmu Pendidikan., 2022

Collation

xviii, 58 hlm.; ilus.; 29 cm

Language

Indonesia

ISBN/ISSN

-

Classification

621.970 7

Content Type

Text

Media Type

-

Carrier Type

-

Edition

-

Subject(s)

pengelasan
Prodi Pendidikan Teknik Mesin

Specific Detail Info

-

Statement of Responsibility

MURZ

Other version/related

File Attachment

Comments

---

You must be logged in to post a comment