Skripsi

UJI KINERJA ELEKTRODA FUEL CELL PADA PERALATAN ALKALINE FUEL CELL (AFC) YANG DIHASILKAN MELALUI ELEKTRODEPOSISI KATALIS Pt/C DAN Pt-Cr/C

---

Penilaian

---

A research has been done about fuel cell electrode performance on alkaline fuel cell (AFC) device was produced by electrodeposition using Pt/C and Pt-Cr/C catalys. Then research began by designing and assembling equipment alkaline fuel cell (AFC) using acrylic glass. Electrode performance analysis of Pt/C and Pt-Cr/C was conducted on alkaline fuel cell device use electrolyte concentration 30%. As supporting data, is also the optimal reaction time analysis. Analysis of physical hydrophobicity with water dripping on the surface of the electrode at the same volume. The results of research showed that the electrode performance test on the content of the catalyst that has the highest average voltage found in test 0.8 mg/cm2 Pt catalyst and the catalyst Pt-Cr/C 0.2/0.8 for 2.985 volt and 2.433 volt. Analysis of the optimal reaction time showed that on average the optimal reaction time occurs in first 6 minutes. The results of hydrophobicity showed that the electrode Pt/C and Pt-Cr/C when installed on alkaline fuel cell equipment are all hydrophobic.

---

Availability

Inventory Code	Barcode	Call Number	Location	Status
1007001069	T65303	T653032010	Central Library (REFERENCES)	Available but not for loan - Not for Loan

Detail Information

Series Title

-

Call Number

T653032010

Publisher

Inderalaya : Jurusan Kimia, Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Sriwijaya., 2010

Collation

xiv, 41 hlm.; ill.; tab.; 28 cm.

Language

Indonesia

ISBN/ISSN

-

Classification

541.372 407

Content Type

Text

Media Type

unmediated

Carrier Type

unspecified

Edition

-

Subject(s)

Jurusan Kimia
Elektrokimia dan Magnetokimia

Specific Detail Info

-

Statement of Responsibility

Furika

Other version/related

File Attachment

Comments

---

You must be logged in to post a comment